{
  Parts and Netlist report for OSMOND PCB.
  © 2000 Graham Hinton
 }
$NOTES
Design Hierarchy Mode: Flat
This format generates a Component Reference List.
Sorted by component reference.

Standard attribute fields used:

Name
Package - Don't use the DesignWorks ones!
Part
Value
Name
Ground
Power  (Vcc)
CGND (Chassis)
Plus5V (Isolated)
AGND
DGND   (Isolated)
Minus5V
Plus12V
Minus12V  
&Vpos
&Vneg

Revision
Designer


Non-standard attribute fields required:

pcbHole
pcbPitch
pcbPart - Must match Parts Library Name

$END
$CHECK(This report form is intended only for FLAT mode designs) $PURE $PHYSICAL
$CREATEREPORT($DESIGNNAME.pcb) $CREATOR(R*ch){This is for BBEdit - change if preferred}

{ Header at top of each page: }
$HEADER
# "Circuit:		$DESIGNNAME      Page:$PAGE"
# "Assembly:		&Assembly"
# "Revision:		&Revision"
# "IF IN DOUBT ASK THE DESIGNER: &Designer"
# "Report Generation Date:$DATE; $TIME"
$ENDHEADER
$COMBDEVSON
$SORT $DEVICES $DEVNAME
$DEVICESPart &pcbPart \{ Name $DEVNAME \}

$ROWS(32000)
$COLUMNS(80)
$SIGSOURCE(CGND) &ChassisGround
$SIGSOURCE(DGND)
$SIGSOURCE(AGND)
$SIGSOURCE(Ground)
$SIGSOURCE(Power) &Power
$SIGSOURCE(Plus5V) &Plus5V
$SIGSOURCE(Minus5V)
$SIGSOURCE(Plus12V)
$SIGSOURCE(Minus12V)
$SIGSOURCE(Plus15V)
$SIGSOURCE(Minus15V)
$AUTONUMBER(3)
$COMBDEVSON
$MAXITEMSPERLINE(11)
$CONTSTART(    )
$REPEATITEMON
$ITEMSEPARATOR( )
$SIGPINFORMAT $DEVNAME-$PINNUM
{
Pick out the power rails first: $SIGSOURCE seems to be fixed
}
$FIND $SIGNALS $NUMPINS(2) $SIGSOURCE $SIGNAME(Ground)
$ASSIGNNAMES $SIGNALS
$ASSIGNNAMES $DEVICES
$SORT $DEVICES $DEVNAME
$SORT $SIGNALS $SIGNAME
$SIGNALSSignal "$SIGNAME"$NEWLINE  \{ $PINS \}

$FIND $SIGNALS $NUMPINS(2) $SIGSOURCE $SIGNAME(Power)
$ASSIGNNAMES $SIGNALS
$ASSIGNNAMES $DEVICES
$SORT $DEVICES $DEVNAME
$SORT $SIGNALS $SIGNAME
$SIGNALSSignal "$SIGNAME"$NEWLINE  \{ $PINS \}

{ others rails }

$FIND $SIGNALS $NUMPINS(2) $SIGSOURCE $NOT$SIGNAME(Power) $NOT$SIGNAME(Ground)
$ASSIGNNAMES $SIGNALS
$ASSIGNNAMES $DEVICES
$SORT $DEVICES $DEVNAME
$SORT $SIGNALS $SIGNAME
$SIGNALSSignal "$SIGNAME"$NEWLINE  \{ $PINS \}

{ All remaining non-SIGSOURCE nets: }

$FIND $SIGNALS $NUMPINS(2) $NOT$SIGSOURCE
$ASSIGNNAMES $SIGNALS
$ASSIGNNAMES $DEVICES
$SORT $DEVICES $DEVNAME
$SORT $SIGNALS $SIGNAME
$SIGNALSSignal "$SIGNAME"$NEWLINE   \{ $PINS \}